| P&C Hand Forged Tool | See also P&C |
| | Acquisition by Plomb |
| | Catalog (1926) 12-Point Box-End Wrenches |
| | Catalog (1928) Single Offset Box-End Wrenches |
| | Catalog Resources |
| | Company History |
| | Flex Handle Lawsuit |
| | Introduction of 12-Point Box Wrenches |
| | P&C [logo] Trademark |
| | Patents Issued |
| | Tool Identification |
| | Trademarks Registered |
| P&C [logo] | Trademark for P&C Hand Forged Tool |
| P&C | See also P&C Hand Forged Tool |
| | Ell Handle, 1/2-Drive |
| | Model 1234 Pliers, 2 |
| | Model 1243 Pliers |
| | Model 1708 Wrench |
| | Model 1708-S Wrench, 2 |
| | Model 1712 Wrench |
| | Model 2220E Wrench |
| | Model 2222 Wrench |
| | Model 2222-E Wrench |
| | Model 2225 Wrench |
| | Model 2228 Wrench |
| | Model 2232 Wrench |
| | Model 2528 Wrench |
| | Model 2532 Wrench |
| | Model 2718 Wrench |
| | Model 2820 Wrench |
| | Model 6008B Universal |
| | Model 6071 Adapter |
| | Model 6205 Extension |
| P&C (Cont.) | Model 6208 Universal |
| | Model 6211 Ratchet |
| | Model 9206 Extension |
| | Model N-84 Wrench |
| | Model N-86 Wrench |
| | Model N-87 Wrench |
| | Model WF-89 Wrench |
| | Ratcheting Box Wrench, 9/16 |
| P. Lowentraut Mfg. | See also Lowentraut, P. Mfg. |
| P.S.&W. | See also Peck, Stow & Wilcox |
| | Model 240-7 Lineman's Pliers |
| | Model 240-8 Lineman's Pliers |
| | Monkey Wrench |
| | Monkey Wrench, 10 Inch |
| PEE WEE | Trademark for Indestro Mfg. |
| PEXTO | Trademark for Peck, Stow & Wilcox |
| PIPEMASTER | Trademark for Erie Tool Works, 2 |
| PLVMB | Use by Plomb |
| PROMATE [logo] | Trademark for Daido Corporation |
| PWG [logo] | Trademark for Parker Wire Goods Co. |
| Pacific Ports | 1920 Ad for Billmont Master Set |
| Pack, E.A. | Patent 2,185,002 |
| Packer Auto Specialty | See also Ray |
| | Company History |
| | Patents Issued |
| | Ray [logo] Trademark |
| | Trademarks Registered |
| Packer, E.R. | Patent 1,057,495 |
| | Patent 1,087,316 |
| | Patent 1,306,712 |
| | Patent 897,772 |
| Pagac, W.T. et al | Patent 5,117,714 |
| Page-Storms Drop Forge | Company Profile |
| | Open-End Wrench, 3/4x13/16 |
| | Tool Identification |
| | Toolpost Wrench, 7/16x1/2 |
| Paine, Jr., K.A. | Patent D174,919 |
| Palm-Grip [stylized] | Trademark for Kipton Industries |
| Palm-Grip | See also Kipton Industries |
| | Ratchet, 3/8-Drive |
| | Screwdriver, Flat 58-R, 2 |
| Palmer Brothers | See also Palmer Welloct Tool |
| | Company Profile |
| | No. 207 Slip-Joint Pliers |
| | Trademarks Registered |
| | Waterpump Pliers, 9 Inch |
| | Welloct [logo] Trademark |
| Palmer Welloct Tool | See also Palmer Brothers |
| Palmer, R.W. et al | Patent 2,152,563, 2, 3 |
| Palmera | Trademark for Vollmer, Juan S.A. |
| Par-X | Trademark for Snap-on Tools Corp. |
| Parallelogram Design | Duro-Chrome 2013 Wrench |
| Park Metalware | See also Xcel |
| | See also Xcelite |
| | Adjustable Drain-Plug Wrench, 8 Inch |
| | Catalog (1960) XceLite Nut Drivers |
| | Company Profile |
| | Patents Issued |
| | XCELITE [logo] Trademark |
| Parker Manufacturing Co. | See also Parker Wire Goods Co. |
| | Company History |
| | Patents Issued |
| | Production for Craftsman |
| | Tool Identification |
| | Trademarks Registered |
| Parker Wire Goods Co. | See also Parker Manufacturing Co. |
| | Briefly Noted |
| | PWG [logo] Trademark |
| Parmelee Wrench Co. | Company Profile |
| | No. 1 Pipe Wrench |
| Parmelee, H. | Patent 648,706 |
| Parmelee, R. | Patent 871,436 |
| Parmelee | Trademark for Walworth Manufacturing |
| Parsons, C.B. | Patent 1,424,676 |
| Parsons, H. | Patent 723,299 |
| Patent | 0,009,300X H. Foot 12 Inch |
| | 0,050,364 Collins Monkey Wrench |
| | 0,067,370 King 5 Inch Pliers |
| | 0,067,370 King 6 Inch Pliers |
| | 0,067,370 King 8 Inch Pliers |
| | 0,084,605 Tower & Lyon |
| | 0,095,744 Walworth 10 Inch |
| | 0,172,649 Billings "M" Pliers |
| | 0,182,615 Todd No. 4 |
| | 0,212,298 Billings "A" |
| | 0,212,298 Billings "D" |
| | 0,212,298 Billings 5 Inch |
| | 0,229,673 Coes Wrench 10 Inch |
| | 0,295,885 Billings "M" Pliers |
| | 0,301,681 Coes Wrench 10 Inch |
| | 0,320,172 Pexto Robinson's |
| | 0,344,769 Cronk 6 Inch Button's |
| | 0,391,957 Place Mfg. Pipe Wrench |
| | 0,454,893 Wakefield No. 3 Pipe Wrench |
| | 0,458,934 Mossberg Eagle |
| Patent (Cont.) | 0,476,629 Gendron 5 Inch |
| | 0,538,411 Coes Wrench 15 Inch |
| | 0,550,025 Mossberg "C" |
| | 0,552,325 Mossberg "C" |
| | 0,553,059 P.S.&W. "Solid Bar" |
| | 0,553,059 P.S.&W. 10 Inch Solid Bar |
| | 0,573,313 Hjorth Lightning 8 In. |
| | 0,583,346 Mossberg "D" |
| | 0,584,019 Elgin |
| | 0,588,069 Reed No. 16 |
| | 0,589,765 Vandegrift No. 5 |
| | 0,657,326 Wakefield No. 8 |
| | 0,657,391 Brosnihan 8 Inch |
| | 0,661,810 Mossberg A-1 |
| | 0,661,810 Mossberg Diamond No. 10 |
| | 0,661,810 Mossberg Diamond No. 11 |
| | 0,661,810 Mossberg F-2 |
| | 0,661,810 Mossberg K-8 |
| | 0,661,810 Mossberg Sterling No. 2 |
| | 0,661,810 Mossberg Sterling No. 3 |
| Patent (Cont.) | 0,661,810 Mossberg Sterling No. 30 |
| | 0,661,810 Mossberg Sterling No. 5 |
| | 0,661,810 Mossberg Sterling [No. 1] |
| | 0,666,202 Bay State 1/2x5/8 |
| | 0,666,202 Bay State 25/32x7/8 |
| | 0,666,202 Bay State 3/4 |
| | 0,666,202 Bay State 3/8x1/2 |
| | 0,666,202 Bay State 5/8 |
| | 0,667,411 S & H Button's Pliers |
| | 0,669,721 Billings "M" Pliers |
| | 0,677,770 Currier-Koeth Kombination Kit |
| | 0,695,072 Mossberg A-1 |
| | 0,695,072 Mossberg Diamond No. 10 |
| | 0,695,072 Mossberg Diamond No. 11 |
| | 0,695,072 Mossberg F-2 |
| | 0,695,072 Mossberg K-8 |
| | 0,695,072 Mossberg Sterling No. 30 |
| | 0,716,515 Bonner Victor |
| | 0,726,794 Bonney Universal Pliers |
| | 0,728,842 Kraeuter "The Victor" |
| Patent (Cont.) | 0,732,858 Irland 11 Inch |
| | 0,737,199 Bonner Victor |
| | 0,738,015 Billings No. 0 |
| | 0,738,015 Billings No. 2, 2 |
| | 0,738,444 Hjorth Lightning 12 In. |
| | 0,738,444 Hjorth Lightning 9 In. |
| | 0,739,316 Irland 11 Inch |
| | 0,742,389 Bullard No. 1 |
| | 0,742,389 Bullard No. 2 |
| | 0,742,389 Bullard No. 3 |
| | 0,751,055 Mossberg Auto-Clé |
| | 0,754,633 Wright Wrench |
| | 0,761,798 Bay State 12 Inch |
| | 0,761,798 Bay State 8 Inch |
| | 0,788,575 Schollhorn |
| | 0,794,064 Utica |
| | 0,800,850 Irland 11 Inch |
| | 0,804,351 Billings 8 Inch "S" |
| | 0,820,185 Rex Wrench "T" Set |
| | 0,820,185 Rex Wrench Tee Handle |
| Patent (Cont.) | 0,845,716 Charles Miller |
| | 0,845,716 Crescent Manufacturing No. 5 |
| | 0,845,716 Miller Combination "Giant" |
| | 0,847,601 "Pick-Up" Ratchet, 2 |
| | 0,848,877 Schollhorn |
| | 0,854,174 Richards Wizard |
| | 0,870,781 Craft 10 Inch |
| | 0,886,448 Wakefield Nut & Pipe |
| | 0,890,146 Rogers Printz Wedge-Adjusting, 2, 3 |
| | 0,890,146 Standard Wrench FITZALL |
| | 0,910,890 Wright Wrench |
| | 0,920,717 Walden-Worcester 4564 |
| | 0,928,719 Walden-Worcester |
| | 0,928,719 Walden-Worcester 3/4 |
| | 0,942,504 Utica 1000-10 |
| | 0,942,504 Utica 1000-6 |
| | 0,942,504 Utica 1000-8 |
| | 0,943,757 Stephens Wrench 1-1/4 |
| | 0,949,083 Mossberg |
| | 0,949,083 Mossberg Folding Tee |
| Patent (Cont.) | 0,952,435 C.M.B. Tee Head |
| | 0,952,436 C.M.B. Ratchet |
| | 0,953,170 Kraeuter 1821-7 |
| | 0,953,170 Kraeuter 1821-8, 2 |
| | 0,953,171 Kraeuter 1202-13 |
| | 0,955,974 Rogers Printz Wedge-Adjusting, 2 |
| | 0,955,974 Standard Wrench FITZALL |
| | 0,956,259 Williams 1125 Special |
| | 0,956,259 Williams 1127C |
| | 0,956,259 Williams 1134 |
| | 0,956,259 Williams 1729 |
| | 0,963,895 Wakefield 24 |
| | 0,965,722 MacDonald "Necessity" Pliers |
| | 0,972,052 Lake Superior 16 Inch |
| | 0,972,052 Lake Superior 6 Inch |
| | 1,000,878 Billings Allen Friction Wrench, 2 |
| | 1,012,037 Trimo 10 Inch |
| | 1,012,037 Trimo 12 Inch |
| | 1,016,296 Eagle Claw Wrench, 2 |
| | 1,041,826 MacDonald |
| Patent (Cont.) | 1,041,967 Cronk Nut Wrench |
| | 1,052,313 GTD "Little Giant" |
| | 1,060,891 Carll |
| | 1,064,956 Schollhorn |
| | 1,064,956 Schollhorn No. 102 |
| | 1,067,876 Hartford Special Machinery |
| | 1,069,041 Weed Sturdy |
| | 1,072,079 Walden-Worcester 1424 |
| | 1,072,807 Ayer Tee-Handle Ratchet |
| | 1,078,059 Mossberg |
| | 1,078,059 Mossberg No. 350 |
| | 1,089,737 Chicago Mfg. & Dist. A1 |
| | 1,105,096 Mossberg 654 |
| | 1,108,111 Knowlson No. 3 |
| | 1,122,335 H.D. Smith 10 Inch Pipe |
| | 1,122,335 H.D. Smith 14 Inch Pipe |
| | 1,141,602 Bonney |
| | 1,141,877 Weed Sturdy |
| | 1,151,319 Speedex Wire Stripper |
| | 1,159,626 Vlchek |
| Patent (Cont.) | 1,164,815 Walden-Worcester 6418 |
| | 1,165,995 Mossberg 645 |
| | 1,167,948 Starrett No. 443 |
| | 1,168,844 Vlchek |
| | 1,181,654 Eifel No. 7 |
| | 1,187,690 Trimo 18 Inch |
| | 1,196,322 Speedex Wire Stripper |
| | 1,205,149 Any Angle |
| | 1,215,308 Crescent Tool |
| | 1,216,886 H.D. Smith Offset Pliers |
| | 1,224,223 Hexall |
| | 1,261,092 Allen Universal Wrench |
| | 1,273,441 Mayhew Pin Punch |
| | 1,281,484 Walden-Worcester 522 |
| | 1,282,028 Walden-Worcester 1016 |
| | 1,282,028 Walden-Worcester 1024 |
| | 1,282,028 Walden-Worcester 1028 |
| | 1,282,028 Walden-Worcester 1424 |
| | 1,282,028 Walden-Worcester 2526 |
| | 1,282,028 Walden-Worcester 2620 |
| Patent (Cont.) | 1,282,028 Walden-Worcester 2718 |
| | 1,282,028 Walden-Worcester 2720 |
| | 1,282,028 Walden-Worcester 6018 |
| | 1,282,028 Walden-Worcester 6020 |
| | 1,289,558 New Britain No. 177 |
| | 1,307,485 APCO |
| | 1,307,485 Peerless |
| | 1,310,473 Billmont Master Wrench |
| | 1,318,088 Mystery Tool |
| | 1,320,547 Schriver IXL 7 Inch |
| | 1,330,542 BHM No. 24 |
| | 1,330,542 K-D No. 600 |
| | 1,335,408 Mossberg 360 |
| | 1,338,804 E.T. |
| | 1,338,804 Stevens Walden |
| | 1,362,014 Lawson 8 Inch |
| | 1,370,194 APCO |
| | 1,370,194 Peerless |
| | 1,371,350 Allen Mfg. No. 19 |
| | 1,380,643 Plomb 5265 |
| Patent (Cont.) | 1,380,643 Plomb 5466 |
| | 1,380,643 Plomb 5668 |
| | 1,380,643 Plomb DTH |
| | 1,386,708 New Britain |
| | 1,386,708 None Better Hurley Ratchet |
| | 1,391,179 Handee Wrench 7 Inch |
| | 1,393,399 Enderes Pliers |
| | 1,407,578 Hoe 15 Inch Pipe Wrench |
| | 1,407,578 Robert |
| | 1,408,524 Winner Tool 8 Inch |
| | 1,413,698 Billings Folding Tee |
| | 1,420,467 Walden 716 |
| | 1,420,467 Walden-Worcester 516 |
| | 1,424,069 APCO, 2 |
| | 1,424,069 Billings 2822 |
| | 1,424,069 Billings 2828 |
| | 1,424,069 Blue Point X-18 |
| | 1,424,069 Mossberg 971 |
| | 1,424,069 Mossberg 974 |
| | 1,424,069 Mossberg 975 |
| Patent (Cont.) | 1,424,069 Mossberg 976, 2 |
| | 1,424,069 Mossberg 977 |
| | 1,424,069 Williams 8032A |
| | 1,424,069 Williams 8037 |
| | 1,424,069 Williams 8140 |
| | 1,424,069 Williams 8725B |
| | 1,424,069 Williams 8729 |
| | 1,424,069 Williams 8731A |
| | 1,424,069 Williams 9725B |
| | 1,425,816 Hinsdale, 2, 3 |
| | 1,426,127 W. & M. Co. Ratchet |
| | 1,435,548 Wakefield 19 |
| | 1,438,900 Handle Lock Socket Set |
| | 1,438,900 None Better No. 177 |
| | 1,438,900 None Better No. 761 |
| | 1,438,970 Mossberg 366 |
| | 1,438,970 Mossberg 367 |
| | 1,443,413 Blackhawk T-3 |
| | 1,443,413 Snap-On, 2 |
| | 1,455,147 Billmont No. 8 Ratchet |
| Patent (Cont.) | 1,461,275 K-D No. 600 |
| | 1,476,058 Blackhawk 5104 |
| | 1,479,772 Simplex No. 11 |
| | 1,479,772 Simplex No. 12 |
| | 1,479,772 Simplex No. 13 |
| | 1,479,772 Simplex No. 14 |
| | 1,479,772 Simplex No. 15 |
| | 1,511,226 Beckley-Ralston AT840 Ratchet |
| | 1,518,251 Mayhew No. 50 Pliers |
| | 1,518,251 Mayhew No. 62 Pliers |
| | 1,533,602 Heller Brothers 10 Inch |
| | 1,533,602 Heller Brothers 6 Inch |
| | 1,533,785 Walden-Worcester 4042 |
| | 1,537,529 Walden-Worcester 6018 |
| | 1,544,520 APCO-Mossberg 3013 |
| | 1,544,520 Snap-on V-21 |
| | 1,553,068 Walden-Worcester 1520 |
| | 1,559,543 Walden-Worcester |
| | 1,571,148 Handee Wrench 7 Inch |
| | 1,571,148 Handee Wrench 8 Inch |
| Patent (Cont.) | 1,574,136 Blackhawk |
| | 1,597,747 Hinsdale TL-1, 2, 3 |
| | 1,597,939 Hinsdale |
| | 1,602,620 Chicago Mfg. Speednut |
| | 1,613,976 Walden-Worcester 01824 |
| | 1,613,976 Walden-Worcester 774 |
| | 1,614,039 Husky Wrench HD-1 |
| | 1,614,039 Husky Wrench No. 1 |
| | 1,614,300 BHM No. 24 |
| | 1,624,508 Reilly No. 9 |
| | 1,624,508 Simplex No. 12 |
| | 1,624,508 Simplex No. 13 |
| | 1,624,508 Simplex No. 14 |
| | 1,624,508 Simplex No. 15 |
| | 1,628,467 Husky Wrench HD-1 |
| | 1,628,467 Husky Wrench No. 1 |
| | 1,634,908 Heller Brothers 10 Inch |
| | 1,634,908 Heller Brothers 6 Inch |
| | 1,635,259 Walden L3 |
| | 1,639,831 Park Metalware |
| Patent (Cont.) | 1,639,831 Xcel 6 Inch |
| | 1,650,085 Hinsdale F-5 |
| | 1,650,085 Hinsdale H-1, 2 |
| | 1,650,085 Hinsdale No. 12B-R |
| | 1,650,085 Hinsdale S-15 |
| | 1,657,978 St. Pierre Compound Pliers |
| | 1,657,978 St. Pierre No. 1, 2 |
| | 1,658,995 St. Pierre Compound Pliers |
| | 1,662,424 Hol-Set Brace Wrench |
| | 1,678,313 Herbrand 177 |
| | 1,698,474 McKaig-Hatch |
| | 1,709,913 Herbrand 832 |
| | 1,709,913 Herbrand 840 |
| | 1,709,913 OTC 1000 |
| | 1,709,913 OTC 1001 |
| | 1,709,913 OTC 1002 |
| | 1,710,554 St. Pierre Compound Pliers |
| | 1,727,623 Ridgid |
| | 1,744,413 Duro 660, 2, 3 |
| | 1,744,413 Duro L-T, 2 |
| Patent (Cont.) | 1,751,657 Duro No. 412 |
| | 1,761,263 Keystone SK555 |
| | 1,764,690 Blackhawk |
| | 1,772,723 Snap-On |
| | 1,775,270 Blue Bird No. 11 |
| | 1,775,402 Husky Wrench |
| | 1,788,535 Duro Metal Products |
| | 1,788,535 Indestro No. 1351 |
| | 1,798,481 Duro 672, 2 |
| | 1,798,481 Indestro 655 |
| | 1,799,622 Billings Plirench |
| | 1,800,447 Wilde Wrench 6 Inch |
| | 1,800,447 Wilde Wrench 7 Inch |
| | 1,800,447 Wilde Wrench 8 Inch |
| | 1,807,134 Blackhawk 9802 |
| | 1,808,190 Vlchek Norivell, 2 |
| | 1,808,190 Vlchek Star |
| | 1,811,137 Williams No. 1999 |
| | 1,824,743 Plomb 6505 |
| | 1,827,202 Snap-On HD-7 |
| Patent (Cont.) | 1,827,202 Snap-on No. 7 |
| | 1,830,033 Chicago Mfg. Speednut |
| | 1,830,577 Barcalo Wrench Set |
| | 1,858,418 Rajah Crimping Plier |
| | 1,862,817 Eifel No. 7 |
| | 1,869,945 Indestro No. 19, 2 |
| | 1,870,612 Barcalo Ford Utility |
| | 1,888,885 Bog 202A |
| | 1,893,353 Blue Bird No. 21 |
| | 1,902,878 Duro 678D, 2 |
| | 1,902,878 Indestro 3201 |
| | 1,902,878 Indestro 3202 |
| | 1,902,878 Indestro 3202R |
| | 1,912,725 Indestro No.28 |
| | 1,927,844 Blackhawk 8432 |
| | 1,936,640 Blackhawk |
| | 1,950,362 Channellock No. 407 |
| | 1,950,362 Channellock No. 410 |
| | 1,950,362 Channellock No. 420 |
| | 1,950,362 Channellock No. 427 |
| Patent (Cont.) | 1,950,362 Vacuum Grip No. 9 |
| | 1,954,820 Williams |
| | 1,955,447 Reed No. 71 |
| | 1,957,462 Williams |
| | 1,957,462 Williams B-51 |
| | 1,957,462 Williams H-51 |
| | 1,957,462 Williams NX-51 |
| | 1,967,458 Barcalo Wrench Set |
| | 1,970,983 Utica BX100 |
| | 1,981,526 Brazil Tools 4270 |
| | 1,981,526 S-K 45170 |
| | 1,982,008 Blackhawk |
| | 1,982,008 Blackhawk 8432 |
| | 1,982,008 Blackhawk 9206 |
| | 1,995,009 Blackhawk 34998 |
| | 1,995,009 Blackhawk 49973 |
| | 1,995,009 Blackhawk 49996 |
| | 2,003,155 Blackhawk |
| | 2,005,202 Snap-on |
| | 2,007,432 Plomb 2034 |
| Patent (Cont.) | 2,007,432 Plomb 6734 |
| | 2,007,432 Proto 6735 |
| | 2,020,883 Snap-on L-67 |
| | 2,024,852 Snap-on |
| | 2,028,561 Snap-on 10-C |
| | 2,028,561 Williams |
| | 2,030,138 Craftsman "BE" Midget Set |
| | 2,030,138 None Better No. 1600 Set |
| | 2,064,264 K-D No. 700 |
| | 2,065,340 Indestro No. 2104 |
| | 2,065,340 Indestro No. 350 |
| | 2,071,543 Williams M-110, 2 |
| | 2,071,543 Williams NM-110 |
| | 2,074,079 Dresser No. 3A |
| | 2,076,830 Ridge Tool 8 Inch |
| | 2,083,130 Danielson Wrench Set |
| | 2,083,131 Auto-Kit No. 100 Set, 2 |
| | 2,091,500 Herbrand VL-530 |
| | 2,112,840 Williams 10 Inch Superjustable, 2 |
| | 2,112,840 Williams 4 Inch Adjustable |
| Patent (Cont.) | 2,112,840 Williams 6 Inch Adjustable |
| | 2,112,840 Williams 8 Inch Adjustable |
| | 2,112,840 Williams 8 Inch Superjustable |
| | 2,119,128 Blue Point CF49 |
| | 2,119,128 Herbrand |
| | 2,119,128 OTC A-100 |
| | 2,136,004 Blue Point CG-270, 2 |
| | 2,150,184 New Britain SS-5 |
| | 2,152,563 Palmer Brothers 9 Inch |
| | 2,152,563 Palmer Brothers No. 207 |
| | 2,176,626 Cornwell MC72A |
| | 2,181,764 Dunlap |
| | 2,182,922 Herbrand S-129 |
| | 2,188,846 Craftsman, 2 |
| | 2,190,081 Blackhawk 35314 |
| | 2,196,297 Snap-on |
| | 2,205,501 Sunnen PN-50 |
| | 2,206,943 Husky H4725 |
| | 2,206,943 New Britain NS40 |
| | 2,206,943 None Better S40 |
| Patent (Cont.) | 2,216,878 Snap-on |
| | 2,232,477 S-K 42470 |
| | 2,280,005 Vise-Grip No. 10 |
| | 2,280,005 Vise-Grip No. 10WR |
| | 2,280,005 Vise-Grip No. 9R |
| | 2,286,917 Blackhawk 39967 |
| | 2,286,917 Blackhawk 49973 |
| | 2,313,793 Speedex Wire Stripper |
| | 2,363,350 Duro-Chrome 648 |
| | 2,395,681 Duro-Chrome 699 |
| | 2,421,038 Dunlap, 2, 3, 4 |
| | 2,441,552 Utica |
| | 2,500,835 Armstrong 27-602 |
| | 2,500,835 Craftsman 42174, 2 |
| | 2,500,835 Klein 68205, 2 |
| | 2,500,835 Langline RBM-1314 |
| | 2,514,130 Vise-Grip No. 10WR |
| | 2,514,130 Vise-Grip No. 9R |
| | 2,533,121 K-D No. 700 |
| | 2,542,241 Husky CS-41 |
| Patent (Cont.) | 2,542,241 Mustang MS41 |
| | 2,550,010 Swagelok |
| | 2,554,990 Husky CB-43 |
| | 2,554,990 Husky CB-45 |
| | 2,554,990 Husky CS-42 |
| | 2,578,686 Proto 500M |
| | 2,578,686 T.A.C. 9031 |
| | 2,578,687 Proto 500M |
| | 2,594,669 Reechet R-375 |
| | 2,600,512 P&C 1234, 2 |
| | 2,600,512 Proto 234 |
| | 2,622,464 Indestro Super 3443 |
| | 2,622,464 Snap-on 90 |
| | 2,622,464 Snap-on 90A |
| | 2,622,464 Snap-on 91CP |
| | 2,622,464 Utica 507-10 |
| | 2,652,735 Thorsen Speed-Hed 780-0 |
| | 2,652,735 Thorsen Speed-Hed 784-1, 2 |
| | 2,669,145 Gripso 211 |
| | 2,671,368 New Britain Machine |
| Patent (Cont.) | 2,685,219 New Britain Machine |
| | 2,686,582 Duro 675 |
| | 2,686,582 Wizard H2833, 2 |
| | 2,687,056 Blackhawk EW-1003 |
| | 2,687,056 Snap-on S-1820W |
| | 2,687,056 Snap-on S-2428W, 2 |
| | 2,691,315 T.A.C. 9011 |
| | 2,691,315 T.A.C. 9036 |
| | 2,691,315 T.A.C. 9042 |
| | 2,719,449 Craftsman 10 Inch |
| | 2,719,449 Craftsman 8 Inch |
| | 2,719,449 Williams APL-6 |
| | 2,731,932 Vise-Grip No. 9R |
| | 2,750,829 Utica 92-8 |
| | 2,814,225 Herbrand |
| | 2,905,037 Proto 720-SL |
| | 2,905,037 Vlchek AV6 |
| | 2,944,452 Craftsman Chain Pipe Wrench |
| | 2,957,377 Bonney ZA707 |
| | 2,981,389 Husky CB-43 |
| Patent (Cont.) | 2,981,389 Husky CB-45 |
| | 2,981,389 Husky CB-54 |
| | 2,981,389 Husky CS-42 |
| | 2,981,389 Husky CS-45 |
| | 2,981,389 NBM |
| | 2,981,389 NBM 45 |
| | 2,982,161 Crescent CT70 |
| | 2,982,161 Crescent LS70 |
| | 3,040,420 K-D No. 445 |
| | 3,125,910 Loc-Rite |
| | 3,208,318 Craftsman "V" QR Ratchet |
| | 3,467,231 Craftsman "V" |
| | 3,467,231 Craftsman 43788 |
| | 3,532,013 Craftsman "V" |
| | 3,532,013 Craftsman 43788 |
| | 3,681,840 Lisle |
| | 3,739,664 Blue-Point HL112P |
| | 3,739,664 Diamond HL18P |
| | 3,762,244 Specialty Tools SW-1003 |
| | 3,941,017 Davenport Crick-It |
| Patent (Cont.) | 3,941,017 Davenport Squeeze-Action |
| | 4,603,607 Channellock No. 440 |
| | 4,603,607 Channellock No. 460 |
| | 5,522,288 BAHCO 801050 |
| | D026,111 Billings 97 |
| | D033,468 H.D. Smith 8 Inch Wrench |
| | D045,919 H.D. Smith Offset Pliers |
| | D046,682 Kraeuter 2801-6 |
| | D047,389 CeeTeeCo Combination |
| | D047,389 CeeTeeCo Specialty |
| | D047,389 Crescent G26 |
| | D047,389 Crescent H28 |
| | D047,389 Crescent J26 |
| | D047,389 Crescent L25 |
| | D047,389 Crescent L26 |
| | D048,996 Cochran Speednut |
| | D053,641 Rosel |
| | D054,516 Bonney |
| | D059,786 Barcalo 10 Inch |
| | D059,786 Barcalo 12 Inch |
| Patent (Cont.) | D059,786 Barcalo 8 Inch |
| | D059,786 Barcalo N6 |
| | D094,156 Channellock No. 307 |
| | D097,325 Bridgeport |
| | D103,579 Indestro 410 |
| | D108,143 Blackhawk |
| | D108,159 Blackhawk 49983 |
| | D111,026 Indestro No. 360 |
| | D111,094 Barcalo 15/16x1 "Convex" |
| | D111,094 Barcalo 19/32x11/16 "Convex" |
| | D111,094 Barcalo 25/32x7/8 "Convex" |
| | D119,441 Duro-Chrome 2114 |
| | D119,441 Duro-Chrome No. 2114 |
| | D132,891 Snap-on F-71-C |
| | D132,891 Snap-on L-710 |
| | D138,173 Cleveland Auto-Grip |
| | D142,888 Utica 550-8 |
| | D158,073 Herbrand |
| | D177,636 Barcalo |
| | D177,636 Barcalo TC22 |
| Patent (Cont.) | D177,636 Barcalo TC26 |
| | D185,651 Craftsman "V" Ratchet, 2, 3 |
| | D199,149 Wright 3428 |
| | D199,149 Wright 4400 |
| | D199,149 Wright 4425 |
| | D32,656 Coes Wrench 15 Inch |
| | RE12,379 Mossberg Auto-Clé |
| | RE13,957 MacDonald "Necessity" Pliers |
| | RE16,354 Walden-Worcester 450 |
| | RE17,417 Blue Point |
| | RE17,417 Blue Point 924 |
| | RE17,417 Blue Point 936 |
| | RE17,417 Blue Point 938 |
| | RE17,417 Blue Point 940 |
| | RE17,417 Blue Point 942 |
| | RE17,417 Blue Point 944 |
| | RE17,417 Williams |
| | RE17,417 Williams 8960 |
| | RE17,417 Williams 8962 |
| | RE17,417 Williams 8962D |
| Patent (Cont.) | RE19,287 Blackhawk 8432 |
| | RE19,287 Snap-on LDH-422-A |
| Patrick, F. | Patent 3,545,316 |
| Patterson, Gottfried et al | Agents for Walden Mfg. |
| Pazzano, F.F. | Patent RE19,027 |
| Pearce, W. | Patent 700,440 |
| Pearson, G.F. | Patent 2,150,184, 2 |
| Pease, A.A. | Patent 172,649, 2 |
| Pebbled Size Fields | on Proto Plomb |
| Peck at al, O. | Patent 212,110 |
| Peck, Stow & Wilcox | See also P.S.&W. |
| | See also Pexto |
| | Catalog (1910) Diagonal Cutting Pliers |
| | Catalog Resources |
| | Company History |
| | PEXTO Trademark |
| | Patents Issued |
| | Pexto [oval logo] Trademark |
| | Trademarks Registered |
| Peerless Wrench | Company Profile |
| | Cunha Patent Ratchet |
| Pendleton Tool Ind. | See also Plomb Tool |
| | Acquisition by Ingersoll-Rand (1964), 2 |
| | Acquisition of Vlchek Tool (1959) |
| | Bet'R-Grip Trademark |
| | Clik-Stop Trademark |
| | Company Profile |
| | Dyna-Ring Trademark |
| | Power-Track Trademark |
| Penens Corporation | See also Challenger |
| | See also Fleet |
| | Company Profile |
| | Fleet Quality Tools [logo] Trademark |
| | Mystery of Plomb "Acquisition" |
| | Reorganization of Cragin Tool |
| | Socketeer Trademark |
| Penens | Adjustable Wrench, 4204 4 Inch |
| | Box-End Wrench, 13/16x7/8 |
| | Box-End Wrench, 6314 3/8x7/16 |
| | Box-End Wrench, 6332 15/16x1 |
| | Combination Wrench, 6026 13/16 |
| | Combination Wrench, 9/16 |
| | Open-End Wrench, 13/16x7/8 |
| | Pliers, Combination 3158 8 Inch |
| | Ratchet, 1/2-Drive 1661 |
| | Ratchet, 3/8-Drive 1260 |
| | Sockets, 1/2-Drive 16xx |
| Pepperdine, B. | Founder, Bog Manufacturing |
| | Patent 1,888,885, 2 |
| | Patent 2,170,461 |
| | Patent 2,191,725 |
| | Patent 2,518,173 |
| | Patent 2,811,068 |
| Perfect Handle | See also Smith, H.D. Company |
| | Brand Used by Smith, H.D. Company |
| Perfection | Brand Used by Duro Metal Products, 2 |
| | Brand used by Western Auto Supply |
| | Model P-27 Wrench |
| | Production by Duro, 2 |
| Petersen Mfg. Co. | See also Vise-Grip |
| | Acquisition by Newell Brands |
| | Acquisition of Irwin Tool |
| | Company History |
| | Name Change to American Tool |
| | Patents Issued |
| | Trademarks Registered |
| Petersen, C. | Patent 2,563,267 |
| | Patent 2,731,932, 2 |
| | Patent 4,541,312 |
| | Patent 4,546,680 |
| | Patent 4,730,524 |
| Petersen, W. | Patent 1,392,443 |
| | Patent 1,489,458 |
| | Patent 2,201,918 |
| | Patent 2,280,005, 2, 3, 4 |
| Peterson & Carlborg | See also P&C Hand Forged Tool |
| Peterson & McNaught | Patent 1,751,657 |
| | Patent 1,858,372 |
| Peterson & Odlum | Patent 1,749,300 |
| Peterson, A.W. | Patent 1,081,626 |
| | Patent 969,401 |
| Peterson, E.H. et al | Patent 1,744,413 |
| | Patent 1,751,657 |
| | Patent 1,872,493 |
| Peterson, E.H. | Patent 1,744,413, 2, 3, 4, 5 |
| | Patent 1,968,215 |
| Peterson, J.A. | Patent 1,587,352 |
| Peterson, J.N. | Patent 1,643,814 |
| | Patent 1,643,855 |
| | Patent 1,643,901 |
| | Patent 1,864,466 |
| Peterson, K. | Patent 1,023,959 |
| | Patent 1,133,236 |
| | Patent 735,289 |
| | Patent 794,249 |
| | Patent D47,389, 2, 3, 4, 5, 6, 7, 8 |
| Peterson, M.L. et al | Patent 2,985,933 |
| Pexto [oval logo] | Trademark for Peck, Stow & Wilcox |
| Pexto | See also Peck, Stow & Wilcox |
| | Model 13-7 Pliers |
| | Model 14 Pliers |
| | Model 20 Pliers |
| | Model 20-4-1/2 Pliers |
| | Model 22-5 1/2 Pliers |
| | Model 27 Pliers |
| | Model 30-7 Pliers |
| | Model 30-8 Pliers |
| | Model 30[-6] Pliers |
| | Model 5-10 Pliers |
| | Model 500-8 Pliers |
| | Model 6-3 Pliers |
| | Model 60-6 Pliers |
| | Model 7-8 Pliers |
| | Model 8 Pliers |
| | Model N8-7 Pliers |
| | Model WO-6 Pliers |
| | Monkey Wrench, Robinson's 10 Inch |
| | Parrot-Head Pliers, 7 Inch Carlson |
| Pexto (Cont.) | Pipe Wrench, 14 Inch Stillson |
| | Pipe Wrench, 8 Inch Stillson |
| | Production by Utica |
| Pfauser & Mandl | Patent 1,995,009 |
| | Patent 2,520,652 |
| Pfauser, E.M. & S. Mandl | Patent 1,995,009, 2, 3 |
| Pfauser, E.M. | Patent 1,685,503 |
| | Patent 1,764,690 |
| | Patent 1,764,690 49994 |
| | Patent 1,797,730 |
| | Patent 1,807,134, 2 |
| | Patent 1,873,472 |
| | Patent 1,881,029 |
| | Patent 1,896,645 |
| | Patent 1,927,844, 2 |
| | Patent 1,936,640 |
| | Patent 1,936,640 Blackhawk 49997 |
| | Patent 2,003,155 |
| | Patent 2,003,155 Blackhawk 49997 |
| | Patent 2,190,081, 2 |
| | Patent 2,218,319 |
| | Patent 2,235,643 |
| | Patent RE19,287, 2 |
| Phillips, G.B. | Patent 117,679 |
| Phillips, H.F. et al | Patent 2,046,840 |
| Phillips, H.F. | Patent 2,046,837 |
| | Patent 2,046,838 |
| Pickering, B.F. | Patent D13,065 |
| Pickop, G.B. | Patent 847,601, 2, 3 |
| Pilger, E.F. | Patent 2,005,202, 2 |
| | Patent 2,028,561, 2, 3 |
| Pin Spanner | Adjustable, Billings No. 0 |
| | Adjustable, Billings No. 1 |
| | Adjustable, Billings No. 2 |
| | Vlchek No. 2 |
| Pipe Cutter | Barnes Tool |
| Pipe Wrench Plier [logo] | Trademark for Wilde Tool |
| Pittsburgh Auto Equipment | 1920 Catalog Ray No. 22 Socket Set |
| | 1920 Catalog Ray No. 39 Socket Set |
| | Catalog No. 7 (1920), 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 |
| | Listings for Barcalo |
| | Listings for Billmont |
| | Listings for Braunsdorf-Mueller |
| | Listings for Buffum |
| | Listings for Kraeuter |
| | Listings for Lane |
| | Listings for Mayhew |
| | Listings for Mossberg |
| | Listings for Packer Auto Specialty |
| | Listings for Smith, H.D. |
| | Listings for Vlchek |
| | Listings for Walden |
| Pittsburgh Gage & Supply | Catalog No. 12 (1913), 2, 3, 4, 5 |
| | Listings for Keystone |
| | Listings for Mossberg |
| | Listings for Trimont |
| | Listings for Utica |
| | Listings for Vlchek |
| Place Mfg. | Company Profile |
| | Pipe Wrench, Giles Patent 10 Inch |
| Platt, A.I. | Patent 1,809,450 |
| Plautz, A.B. | Patent 2,595,368 |
| Plier Wrench | Eifel No. 7 |
| Pliers | Angle-Nose, Craftsman 5835-8 |
| | Angle-Nose, Craftsman 6 Inch |
| | Angle-Nose, Craftsman 6 Inch "P" |
| | Angle-Nose, Craftsman 8 Inch, 2 |
| | Angle-Nose, Craftsman 9.5 Inch |
| | Angle-Nose, Craftsman Vanadium 8 Inch |
| | Angle-Nose, Craftsman Vanadium 8 Inch "AM" |
| | Angle-Nose, Kraeuter 743-7 |
| | Angle-Nose, Kraeuter 743-8, 2 |
| | Angle-Nose, Utica 523-7 |
| | Angle-Nose, Utica 531-8 |
| | Angle-Nose, Ward's MQ 7 Inch, 2 |
| | Armor-Cutting, Utica BX100 |
| | Assembly, Craftsman 8 Inch "C" |
| | Battery Terminal, BESCO 9857 |
| | Battery Terminal, Herbrand 177 |
| | Battery Terminal, Mystery Tool |
| | Battery, Barcalo 8 Inch |
| | Battery, Blue Bird No. 11 |
| | Battery, Bonney Early |
| Pliers (Cont.) | Battery, Champion DeArment 307 |
| | Battery, ChromeXQuality, 2 |
| | Battery, Craftsman "C-F" |
| | Battery, Craftsman "P" |
| | Battery, Craftsman 4476 "B" |
| | Battery, Craftsman Early Rope-Banded |
| | Battery, Diamond HB28 |
| | Battery, Dunlap |
| | Battery, Duro 2116 |
| | Battery, Duro-Chrome 2114, 2 |
| | Battery, Duro-Chrome 2115 |
| | Battery, Herbrand 179 |
| | Battery, Indestro 3415 |
| | Battery, Kraeuter 948 |
| | Battery, Kraeuter 951-7, 2 |
| | Battery, MTF No. 11 |
| | Battery, New Britain Machine P-41 |
| | Battery, Plomb 218 |
| | Battery, Utica 1-7 |
| | Battery, Utica 514 |
| Pliers (Cont.) | Battery, Utica 522-7-1/2 |
| | Battery, Utica 524-7, 2 |
| | Battery, Utica 528 |
| | Battery, Vacuum Grip 308, 2, 3 |
| | Battery, Vacuum Grip 7 |
| | Battery, Vacuum Grip 7A |
| | Battery, Wilde 410 |
| | Brake Spring, Bonney 2680 |
| | Brake Spring, Craftsman "P" |
| | Brake Spring, Duro-Chrome 2126 |
| | Brake Spring, Herbrand 182 |
| | Brake Spring, Herbrand 183 |
| | Brake Spring, Herbrand 188 |
| | Brake Spring, Kraeuter 351-7 |
| | Brake Spring, Utica 521 |
| | Brake Spring, Utica 525 |
| | Brake Spring, Vacuum Grip 31 |
| | Button's Pattern, Craftsman 10 Inch |
| | Button's Pattern, Craftsman 8 Inch |
| | Button's Pattern, Craftsman 8.5 Inch "AM" |
| Pliers (Cont.) | Button's Pattern, Crescent 1000-8 |
| | Button's Pattern, Cronk 6 Inch |
| | Button's Pattern, King 10 Inch |
| | Button's Pattern, King 5 Inch |
| | Button's Pattern, King 6 Inch |
| | Button's Pattern, King 8 Inch, 2 |
| | Button's Pattern, Kraeuter 1841-10 |
| | Button's Pattern, Kraeuter 1841-6.5 |
| | Button's Pattern, Kraeuter 1841-8, 2 |
| | Button's Pattern, Red Devil 1000 |
| | Button's Pattern, Red Devil 1000-8 |
| | Button's Pattern, Red Devil 999 |
| | Button's Pattern, Revonoc 10 Inch |
| | Button's Pattern, Smith & Hemenway |
| | Button's Pattern, Utica 10 Inch |
| | Button's Pattern, Utica 1000-10, 2 |
| | Button's Pattern, Utica 1000-6 |
| | Button's Pattern, Utica 1000-8, 2 |
| | Button's Pattern, Utica 300 |
| | Button's Pattern, Utica 3000-6 |
| Pliers (Cont.) | Button's Pattern, Utica 6 Inch Early |
| | Button's Pattern, Utica 8 Inch Early |
| | Button's Pattern, V&B 8 Inch |
| | Button's Pattern, Ward's Lakeside 10 Inch, 2 |
| | Button's, Irvington 5 Inch |
| | Chain Repair, E.T. Woodworth Patent |
| | Chain Repair, Herbrand |
| | Chain Repair, Herbrand 161 |
| | Chain Repair, MacDonald "Necessity" |
| | Chain Repair, MacDonald Patent |
| | Chain Repair, McKaig-Hatch Chain |
| | Chain Repair, Schriver IXL 7 Inch |
| | Chain Repair, St. Pierre Compound |
| | Chain Repair, St. Pierre No. 1, 2 |
| | Chain Repair, Stevens Walden T-615 |
| | Chain Repair, Utica 15 |
| | Chain Repair, Weed "Sturdy" |
| | Combination, Herbrand 5 Inch |
| | Combination, Lobster 6 Inch |
| | Combination, MRS 6 Inch |
| Pliers (Cont.) | Combination, Sears 30701 "BF", 2 |
| | Combination, Sears 8 Inch "BF", 2 |
| | Combination, Stanley 84-106 6 Inch, 2 |
| | Combination, Tone 8 Inch, 2 |
| | Combination, Toyota Motor 8 Inch "KTC" |
| | Combination, Truecraft K158 |
| | Compound, Herbrand 178 |
| | Compound, Proto 234 |
| | Compound, Schollhorn Bernard 4.5 Inch |
| | Compound, Schollhorn No. 102-6.5 |
| | Compound, Starrett 1-7 |
| | Diagonal Cutters, 2 Waymoth |
| | Diagonal Cutters, 5783-6 Craftsman |
| | Diagonal Cutters, Channellock 436 |
| | Diagonal Cutters, Channellock 437 |
| | Diagonal Cutters, Channellock 447 |
| | Diagonal Cutters, Craftsman 5 Inch, 2 |
| | Diagonal Cutters, Craftsman 6 Inch, 2 |
| | Diagonal Cutters, Craftsman 7 Inch |
| | Diagonal Cutters, Crescent 542-7 |
| Pliers (Cont.) | Diagonal Cutters, Crescent 742-7 |
| | Diagonal Cutters, Crescent 940-6 |
| | Diagonal Cutters, Crescent 942-4 |
| | Diagonal Cutters, Crescent 942-5.5 |
| | Diagonal Cutters, Crescent 942-6 |
| | Diagonal Cutters, Diamond S56 |
| | Diagonal Cutters, Fuller 6 Inch 190 "ITO", 2 |
| | Diagonal Cutters, Fuller 7 Inch Maruto, 2 |
| | Diagonal Cutters, Herbrand 31-7 |
| | Diagonal Cutters, Herbrand 32-7 |
| | Diagonal Cutters, Klein 202-5 |
| | Diagonal Cutters, Klein 220-7 |
| | Diagonal Cutters, Klein D228-8 |
| | Diagonal Cutters, Kraeuter 2601-5 |
| | Diagonal Cutters, Kraeuter 2601-6 |
| | Diagonal Cutters, Kraeuter 2611-6.5 |
| | Diagonal Cutters, Kraeuter 4501-4.5 |
| | Diagonal Cutters, Kraeuter 4501-6 |
| | Diagonal Cutters, Kraeuter 4601-6 |
| | Diagonal Cutters, Kraeuter 4611-6.5 |
| Pliers (Cont.) | Diagonal Cutters, Kraeuter 4700-7 |
| | Diagonal Cutters, Lindström 4 Inch |
| | Diagonal Cutters, Pexto 27 |
| | Diagonal Cutters, Sanki 125mm, 2 |
| | Diagonal Cutters, Snap-on HL-9 |
| | Diagonal Cutters, Truecraft K306, 2 |
| | Diagonal Cutters, Utica 38-4 |
| | Diagonal Cutters, Utica 39-7 |
| | Diagonal Cutters, Utica 40-7 |
| | Diagonal Cutters, Utica 41-6 |
| | Diagonal Cutters, Utica 43-6 |
| | Diagonal Cutters, Utica 45-6 |
| | Diagonal Cutters, Vacuum Grip 386 |
| | Diagonal Cutters, Vacuum Grip 86 |
| | Diagonal Cutters, Vacuum Grip 87 |
| | Diagonal Cutters, Wilde 402 |
| | Diagonal Cutting, Globemaster 6113 |
| | Duckbill, Crescent 23-7 |
| | Duckbill, Plomb 228 |
| | Duckbill, Utica 87-7 |
| Pliers (Cont.) | End Nippers, Channellock 356 |
| | End Nippers, Craftsman Vanadium 6 Inch "C" |
| | End Nippers, Crescent 72-7 |
| | End Nippers, Crescent 72-8 |
| | End Nippers, Diamond G57 |
| | End Nippers, Kraeuter 1850-5 |
| | End Nippers, Kraeuter 1850-6 |
| | End Nippers, Kraeuter 1850-7 |
| | End Nippers, Kraeuter 1851-5 |
| | End Nippers, Kraeuter 1851-7 |
| | End Nippers, Todd 8 Inch |
| | End Nippers, Utica 260-6 |
| | End Nippers, Utica 260-7 |
| | End Nippers, Utica 360-7 |
| | End Nippers, Utica 60-5 |
| | End Nippers, Utica 60-6 |
| | End Nippers, Utica 60-7 |
| | End Nippers, Utica 65-5 |
| | End Nippers, Utica No. 3 |
| | End Nippers, Utica [60-6] Early |
| Pliers (Cont.) | End Nippers, Vacuum Grip 17 |
| | Fencing, Crescent 1936-10 |
| | Fencing, Cronk 10 Inch |
| | Fencing, Kraeuter 1880-10.5 |
| | Fencing, Red Devil 1906, 2 |
| | Fencing, Utica No. 29 |
| | Fender Bolt, Herbrand 158 |
| | Fixed-Joint, Kraeuter US, 2 |
| | Flat-Nose, Boker 5.5 Inch |
| | Flat-Nose, C.S. Osborne 6 Inch |
| | Flat-Nose, Kraeuter 1591-4.5 |
| | Flat-Nose, Kraeuter 1601-4 |
| | Flat-Nose, Kraeuter 1601-4.5 |
| | Flat-Nose, Kraeuter 1741-6 |
| | Flat-Nose, Kraeuter 1751-6 |
| | Flat-Nose, Pexto 20 |
| | Flat-Nose, Pexto 20-4-1/2 |
| | Flat-Nose, Utica 20 |
| | Flat-Nose, Utica 20-5 |
| | Flat-Nose, Utica 20-6 |
| Pliers (Cont.) | Flat-Nose, Utica 86-6 |
| | Flat-Nose, Utica 86-8 |
| | Gas and Burner, C.S. Osborne 6 Inch |
| | Gas and Burner, C.S. Osborne 8 Inch |
| | Gas and Burner, Cronk 8 Inch |
| | Gas and Burner, Danielson 8 Inch |
| | Gas and Burner, Kraeuter 1863-6.5 |
| | Gas and Burner, Lowentraut 10 Inch |
| | Gas and Burner, Lowentraut 6 Inch |
| | Gas and Burner, Lowentraut 8 Inch |
| | Gas and Burner, Pexto 13-7 |
| | Gas and Burner, Pexto 14 |
| | Gas and Burner, Pexto 6-3 |
| | Gas and Burner, Utica 130-8 |
| | Gas and Burner, Utica 1300-10 |
| | Gas and Burner, Utica 1300-5 |
| | Gas and Burner, Utica 1300-6, 2 |
| | Gas and Burner, Utica 1300-7 |
| | Gas and Burner, Utica 1300-8, 2 |
| | Gas, CFT 8 Inch |
| Pliers (Cont.) | Gas, Herbrand Early |
| | Glass, Kraeuter 451-8 |
| | Grease Cap, Snap-on GCP-10 |
| | Gripping, Eagle Claw 10 Inch |
| | Gripping, Eagle Claw 7 Inch |
| | Hjorth "Lightning" 8 In. |
| | Hjorth Lightning 12 In. |
| | Hjorth Lightning 9 In. |
| | Hose Clamp, Bonney B43 |
| | Hose Clamp, Diamond KC-18 |
| | Hose Clamp, Herbrand 175 |
| | Hose-Clamp, Vlchek PHC208 |
| | Ignition, Herbrand 167 |
| | Ignition, K-D No. 7 |
| | Ignition, Vacuum Grip 105 |
| | Ignition, Weber-Knapp 5 Inch, 2 |
| | Ignition, Williams No. 1519, 2 |
| | Lineman's, ARM P-200 |
| | Lineman's, Barcalo 6 Inch |
| | Lineman's, Boker 5612 7.5 Inch |
| Pliers (Cont.) | Lineman's, Boker 6612 8.5 Inch |
| | Lineman's, Channellock 3048-1/2 |
| | Lineman's, Craftsman 4518-7 "AM" |
| | Lineman's, Craftsman 4518-7 "C" |
| | Lineman's, Craftsman 5782-8.5 |
| | Lineman's, Craftsman 6 Inch |
| | Lineman's, Craftsman 8.5 Inch "AM" |
| | Lineman's, Craftsman 8.5 Inch "C" |
| | Lineman's, Craftsman Vanadium 8.5 Inch "C" |
| | Lineman's, Crescent 1950-7 |
| | Lineman's, Crescent 1950-8 |
| | Lineman's, Denko 7 Inch |
| | Lineman's, Diamond SL56 |
| | Lineman's, Dunlap 6 Inch |
| | Lineman's, Fujiya 1050 175mm |
| | Lineman's, Fuller 194 8 Inch |
| | Lineman's, Fuller 194-8 |
| | Lineman's, Fuller 7 Inch, 2 |
| | Lineman's, Fuller 8 Inch "Maruto", 2 |
| | Lineman's, IMCO 3700 |
| Pliers (Cont.) | Lineman's, KTC 200mm "MH", 2 |
| | Lineman's, Keiba P-107 |
| | Lineman's, King TTC CP-150 |
| | Lineman's, Klein 201-8 |
| | Lineman's, Klein 201-9NE |
| | Lineman's, Knipex 300 |
| | Lineman's, Kraeuter 1380-7 |
| | Lineman's, Kraeuter 1801-6 |
| | Lineman's, Kraeuter 1801-7 |
| | Lineman's, Kraeuter 1801-8.5 |
| | Lineman's, Kraeuter 1821-8 |
| | Lineman's, Kraeuter 1831-6.5 |
| | Lineman's, Kraeuter 1831-7 |
| | Lineman's, Kraeuter 1831-8, 2 |
| | Lineman's, Kraeuter 1834-6.5 |
| | Lineman's, Kraeuter 2801-6 |
| | Lineman's, Kraeuter 2801-7 |
| | Lineman's, Kraeuter 2801-8.5 |
| | Lineman's, Kraeuter 4801-8.5, 2 |
| | Lineman's, Lobster 7 Inch, 2 |
| Pliers (Cont.) | Lineman's, Merry 7 Inch No. 1050 |
| | Lineman's, Pexto 240-7 |
| | Lineman's, Pexto 240-8 |
| | Lineman's, Pexto 30-7 |
| | Lineman's, Pexto 30-8 |
| | Lineman's, Pexto 30[-6] |
| | Lineman's, Pexto 500-8 |
| | Lineman's, Red Devil 1050 |
| | Lineman's, Red Devil 1950-8 |
| | Lineman's, Red Devil 50 |
| | Lineman's, S&H 1650-8 |
| | Lineman's, Schollhorn 7.5 Inch Ideal |
| | Lineman's, Sears 3079 "BF", 2, 3 |
| | Lineman's, Sears 3080 "BF" |
| | Lineman's, Snap-on 58R |
| | Lineman's, Three Peaks CP-200 |
| | Lineman's, Truecraft 358, 2 |
| | Lineman's, Truecraft K-358-G |
| | Lineman's, Truecraft K-358-G 8 Inch |
| | Lineman's, Utica 1050-8 |
| Pliers (Cont.) | Lineman's, Utica 1950-6 |
| | Lineman's, Utica 1950-8 |
| | Lineman's, Utica 2050-6 |
| | Lineman's, Utica 2050-8 |
| | Lineman's, Utica 259-6 |
| | Lineman's, Utica 50-4 |
| | Lineman's, Utica 50-5 |
| | Lineman's, Utica 50-6 |
| | Lineman's, Utica 50-7 |
| | Lineman's, Utica 50-8, 2 |
| | Lineman's, Utica 52-6 |
| | Lineman's, Utica 700-6 |
| | Lineman's, Utica 700-7 |
| | Lineman's, Utica 708 |
| | Lineman's, Utica 8 Inch Early |
| | Lineman's, Utica TL-13-A |
| | Lineman's, Vacuum Grip 56 |
| | Lineman's, Vacuum Grip 57 |
| | Lineman's, Victor 7 Inch |
| | Lineman's, Witherby 1855 4.5 Inch |
| Pliers (Cont.) | Lineman's, Ōyane Riki 7 Inch |
| | Linemans's, Kraeuter 1821-5.5 |
| | Linemans's, Kraeuter 1821-6.5, 2 |
| | Linemans's, Kraeuter 1821-7 |
| | Linemans's, Kraeuter 1821-8 |
| | Lock-Ring, Utica 534 |
| | Locking, Craftsman 10 Inch "I", 2 |
| | Locking, Gripso 211 |
| | Locking, Gripso 8 Inch |
| | Locking, Vise-Grip No. 10 |
| | Locking, Vise-Grip No. 10WR |
| | Locking, Vise-Grip No. 9LN |
| | Lockring, Herbrand 185 |
| | Lockring, Herbrand 186 |
| | Long-Nose, Danielson 6 Inch |
| | Long-Nose, Kraeuter 1711-5 |
| | Long-Nose, Kraeuter 1721-6 |
| | Midget, Vacuum Grip 5 |
| | Midget, Vacuum Grip No. 5 |
| | Needlenose, Channellock 3017-1/2 |
| Pliers (Cont.) | Needlenose, Channellock 317-1/2 |
| | Needlenose, Channellock 326 |
| | Needlenose, Craftsman 6 Inch Vanadium |
| | Needlenose, Craftsman 7.5 Inch Vanadium |
| | Needlenose, Crescent 1033-6 |
| | Needlenose, Crescent 654-7 |
| | Needlenose, Crescent 777-6 |
| | Needlenose, Diamond SN56 |
| | Needlenose, Dunlap 6 Inch |
| | Needlenose, Fuller 6 Inch "Maruto", 2 |
| | Needlenose, Fuller 6 Inch 192, 2 |
| | Needlenose, Fuller 6 Inch 192-6, 2 |
| | Needlenose, Herbrand 36-6 |
| | Needlenose, Herbrand 37-6 |
| | Needlenose, Ito SUN 312 6 Inch |
| | Needlenose, KTC 150mm "MH", 2 |
| | Needlenose, Klein 203-6 |
| | Needlenose, Klein 203-8 |
| | Needlenose, Klein 303-6 |
| | Needlenose, Kraeuter 1621-6 |
| Pliers (Cont.) | Needlenose, Kraeuter 1631-5.5 |
| | Needlenose, Kraeuter 1641-5 |
| | Needlenose, Kraeuter 1661-6 |
| | Needlenose, Kraeuter 1671-6 |
| | Needlenose, Kraeuter 1691-6 |
| | Needlenose, Kraeuter 1771-7 |
| | Needlenose, Lindström PR-50 |
| | Needlenose, Sears 6 Inch "BF" |
| | Needlenose, Sears 6 Inch 3077 "BF", 2 |
| | Needlenose, Sears 6 Inch 30803 "BF", 2 |
| | Needlenose, Snap-on 60C |
| | Needlenose, Snap-on 94 |
| | Needlenose, Snap-on 96 |
| | Needlenose, Three Peaks RP-150 |
| | Needlenose, Truecraft K406, 2 |
| | Needlenose, Utica 1033-6 |
| | Needlenose, Utica 22-4-1/2 |
| | Needlenose, Utica 22-5 |
| | Needlenose, Utica 22-5.5 |
| | Needlenose, Utica 22-6, 2 |
| Pliers (Cont.) | Needlenose, Utica 227 |
| | Needlenose, Utica 654-6, 2 |
| | Needlenose, Utica 655-6 |
| | Needlenose, Utica 777-6 |
| | Needlenose, Utica 82-8 |
| | Needlenose, Utica 888-6 |
| | Needlenose, Utica 896 |
| | Needlenose, Utica No. 31 |
| | Needlenose, Vacuum Grip 196 |
| | Needlenose, Vacuum Grip 96 |
| | Needlenose, Williams 76 |
| | Parrot-Head, Carlson 7 Inch |
| | Parrot-Head, Danielson 7 Inch |
| | Parrot-Head, Pexto 7 Inch Carlson |
| | Parrot-Head, Vacuum Grip 207 |
| | Pincers, Pexto 60-6 |
| | Piston Ring, Truth Tool |
| | Round Nose, Kraeuter 1611-5 |
| | Round Nose, Kraeuter 1611-6 |
| | Round-Nose, Utica 21-4 |
| Pliers (Cont.) | Round-Nose, Utica 21-5 |
| | Side Cutting Button's, Utica 2001-8 |
| | Slip-Joint, "MoToR KiT" 6 Inch |
| | Slip-Joint, B6 Bonney, 2 |
| | Slip-Joint, BHM 133 |
| | Slip-Joint, BHM 7 Inch |
| | Slip-Joint, Barcalo 10 Inch |
| | Slip-Joint, Barcalo 7 Inch |
| | Slip-Joint, Bergman 117 |
| | Slip-Joint, Bergman 708 |
| | Slip-Joint, Billings "M" |
| | Slip-Joint, Billings Box-Joint |
| | Slip-Joint, CFT 5 Inch |
| | Slip-Joint, CFT 7 Inch |
| | Slip-Joint, CeeTeeCo 5 Inch |
| | Slip-Joint, CeeTeeCo 8 Inch |
| | Slip-Joint, Channellock 516 |
| | Slip-Joint, Channellock 548 |
| | Slip-Joint, Craftsman 5795 5.5 Inch |
| | Slip-Joint, Craftsman 6.5 Inch, 2 |
| Pliers (Cont.) | Slip-Joint, Craftsman 6.75 Inch "P" |
| | Slip-Joint, Craftsman 6.75 Inch "WF", 2 |
| | Slip-Joint, Craftsman 7 Inch "B" |
| | Slip-Joint, Craftsman 8 Inch "BF", 2 |
| | Slip-Joint, Craftsman 8 Inch "LC" |
| | Slip-Joint, Crescent G28 8 Inch |
| | Slip-Joint, Crescent L25 |
| | Slip-Joint, Crescent L26, 2 |
| | Slip-Joint, Cronk 6.5 Inch |
| | Slip-Joint, Cronk 8 Inch |
| | Slip-Joint, Danielson 6 Inch |
| | Slip-Joint, Danielson 8 Inch, 2 |
| | Slip-Joint, Diamond DH16 "Handiman" |
| | Slip-Joint, Diamond DH18 "Handyboy" |
| | Slip-Joint, Diamond H16 |
| | Slip-Joint, Diamond K36 |
| | Slip-Joint, Diamond M26 |
| | Slip-Joint, Diamond N18 |
| | Slip-Joint, Dunlap 5.5 Inch |
| | Slip-Joint, Dunlap 6 Inch |
| Pliers (Cont.) | Slip-Joint, Dunlap 7 Inch |
| | Slip-Joint, Enderes 6 Inch |
| | Slip-Joint, Fuller 6 Inch |
| | Slip-Joint, Fuller 6 Inch 196-6 |
| | Slip-Joint, Fuller 6 Inch 196-6 "BF" |
| | Slip-Joint, Fuller 6 Inch 196-6 |
| | Slip-Joint, Fuller 6 Inch Thin |
| | Slip-Joint, Fuller 8 Inch |
| | Slip-Joint, Fuller 8 Inch 196-8, 2 |
| | Slip-Joint, Fuller 8 Inch, 2 |
| | Slip-Joint, H.D. Smith Offset |
| | Slip-Joint, Herbrand 34-8 |
| | Slip-Joint, Herbrand 35-7 |
| | Slip-Joint, Herbrand 6 Inch |
| | Slip-Joint, Hinsdale L-10 |
| | Slip-Joint, Hjorth 6 Inch |
| | Slip-Joint, Hudson Forge Thin-Nose |
| | Slip-Joint, Husky P65-10 |
| | Slip-Joint, Husky P65-10 10 Inch |
| | Slip-Joint, Indestro Thin 6 Inch |
| Pliers (Cont.) | Slip-Joint, KTC 150mm JPS-150 |
| | Slip-Joint, KTC 200mm |
| | Slip-Joint, Kraeuter 1356-6 |
| | Slip-Joint, Kraeuter 1380-6.5 |
| | Slip-Joint, Kraeuter 1863-9 |
| | Slip-Joint, Kraeuter 1903-7 |
| | Slip-Joint, Kraeuter 1913-7 |
| | Slip-Joint, Kraeuter 1923-10 |
| | Slip-Joint, Kraeuter 1923-7 |
| | Slip-Joint, Kraeuter 1923-8 |
| | Slip-Joint, Kraeuter 1933-5.5 |
| | Slip-Joint, Kraeuter 1973-5.5, 2 |
| | Slip-Joint, Kraeuter 1983-7 |
| | Slip-Joint, Kraeuter 2003-6, 2 |
| | Slip-Joint, Kraeuter 305-7, 2 |
| | Slip-Joint, Kraeuter 356-10, 2, 3 |
| | Slip-Joint, Kraeuter 356-5-1/2 |
| | Slip-Joint, Kraeuter 356-6 |
| | Slip-Joint, Kraeuter 356-8 |
| | Slip-Joint, Kraeuter 360-6 |
| Pliers (Cont.) | Slip-Joint, Kraeuter 40-6 |
| | Slip-Joint, Lectrolite 7 Inch |
| | Slip-Joint, McKaig-Hatch 6 Inch |
| | Slip-Joint, McKaig-Hatch 6 Inch "Ford" |
| | Slip-Joint, McKaig-Hatch 8 Inch 438 |
| | Slip-Joint, Millers Falls 1470 6 Inch |
| | Slip-Joint, Motor Spec K110 |
| | Slip-Joint, Motor Spec K18 |
| | Slip-Joint, P&C 1234, 2 |
| | Slip-Joint, Palmer Brothers 9 Inch Waterpump |
| | Slip-Joint, Palmer Brothers No. 207 |
| | Slip-Joint, Penens 3158 |
| | Slip-Joint, Pexto 22-5 1/2 |
| | Slip-Joint, Pexto 5-10 |
| | Slip-Joint, Pexto 7-8 |
| | Slip-Joint, Pexto 8 |
| | Slip-Joint, Pexto N8-7 |
| | Slip-Joint, Pexto WO-6 |
| | Slip-Joint, Plomb 246 |
| | Slip-Joint, Plomb 256 |
| Pliers (Cont.) | Slip-Joint, Proto 202 |
| | Slip-Joint, Proto 6 Inch |
| | Slip-Joint, Red Devil 444 7.5 Inch |
| | Slip-Joint, Red Devil 925 |
| | Slip-Joint, Red Devil 925-10 |
| | Slip-Joint, Red Devil 925-6 |
| | Slip-Joint, Sanki 7 Inch |
| | Slip-Joint, Sexauer 8 Inch Wrench |
| | Slip-Joint, Snap-on 62 |
| | Slip-Joint, Utica 14 |
| | Slip-Joint, Utica 5000 |
| | Slip-Joint, Utica 511-10 |
| | Slip-Joint, Utica 511-6 |
| | Slip-Joint, Utica 511-8 |
| | Slip-Joint, Utica 512 |
| | Slip-Joint, Utica 513-5.5 |
| | Slip-Joint, Utica 517-10 |
| | Slip-Joint, Utica 517-5 |
| | Slip-Joint, Utica 550-8 |
| | Slip-Joint, Utica 6000-7 |
| Pliers (Cont.) | Slip-Joint, Utica 6008 Early |
| | Slip-Joint, Utica 7-6 |
| | Slip-Joint, Utica 8-6 |
| | Slip-Joint, Utica Early |
| | Slip-Joint, Vacuum Grip 137 |
| | Slip-Joint, Vacuum Grip 25, 2 |
| | Slip-Joint, Vacuum Grip 26, 2 |
| | Slip-Joint, Vacuum Grip 27 |
| | Slip-Joint, Vacuum Grip 34 |
| | Slip-Joint, Vacuum Grip 35 |
| | Slip-Joint, Vacuum Grip 36 |
| | Slip-Joint, Vacuum Grip 37 |
| | Slip-Joint, Vacuum Grip 42 |
| | Slip-Joint, Vacuum Grip 45 |
| | Slip-Joint, Vacuum Grip 46, 2 |
| | Slip-Joint, Vacuum Grip 47 |
| | Slip-Joint, Vacuum Grip 49 |
| | Slip-Joint, Vacuum Grip 61 |
| | Slip-Joint, Vacuum Grip 62 |
| | Slip-Joint, Vacuum Grip 65, 2, 3 |
| Pliers (Cont.) | Slip-Joint, Vacuum Grip 66, 2 |
| | Slip-Joint, Vlchek 6 Inch |
| | Slip-Joint, Vlchek 8 Inch |
| | Slip-Joint, Westline H5005 Thin "TOP", 2 |
| | Slip-Joint, Wilde 6 Inch Wrench |
| | Slip-Joint, Wilde 7 Inch Wrench |
| | Slip-Joint, Wilde 8 Inch Wrench |
| | Slip-Joint, Williams PL-16 |
| | Slip-Joint, Williams PL-6, 2 |
| | Snap-Ring, Bonney B21 |
| | Snap-Ring, Craftsman, 2 |
| | Snap-Ring, K-D No. 445 |
| | Snap-Ring, Lisle Reversible |
| | Snap-Ring, OTC 614 |
| | Snap-Ring, OTC 714 |
| | Snap-Ring, Vacuum Grip 70-A |
| | Snap-Ring, Williams 1515 |
| | Soft-Grip, Utica 529 |
| | Specialty, Crescent CeeTeeCo |
| | Specialty, Hartford Special Machinery |
| Pliers (Cont.) | Specialty, OTC Bent Longnose |
| | Specialty, Rajah Crimping |
| | Specialty, Vacuum Grip Indian Motorcycle |
| | Specialty, Vim 216 |
| | Staple-Pulling, Cronk |
| | Staple-Pulling, Utica Russell Patent |
| | Steeldraulic, Blackhawk 2581 |
| | Steeldraulic, Bonney 2581 |
| | Steeldraulic, Cornwell |
| | Steeldraulic, Duro-Chrome 2120 |
| | Steeldraulic, Herbrand 272 |
| | Steeldraulic, Utica 516 |
| | Steeldraulic, Vacuum Grip 14 |
| | Steeldraulic, Williams 1516 |
| | Tapered-Nose, Utica B120 |
| | Thin-Nose, Companion 6 Inch "BF" |
| | Thin-Nose, Crescent 6 Inch Bent |
| | Thin-Nose, Danielson 6 Inch |
| | Thin-Nose, Dunlap 7 Inch |
| | Thin-Nose, Fulton 6 Inch |
| Pliers (Cont.) | Thin-Nose, Hibbard 6 Inch Bent |
| | Thin-Nose, Mayhew No. 50 |
| | Thin-Nose, Mayhew No. 62 |
| | Thin-Nose, Merit 7 Inch |
| | Thin-Nose, Proto 260 |
| | Thin-Nose, Sears 6 Inch "BF" |
| | Tongue-and-Groove, Blue-Point HL112P |
| | Tongue-and-Groove, Channellock 407 |
| | Tongue-and-Groove, Channellock 410, 2 |
| | Tongue-and-Groove, Channellock 420, 2, 3 |
| | Tongue-and-Groove, Channellock 426 |
| | Tongue-and-Groove, Channellock 427 |
| | Tongue-and-Groove, Channellock 440 |
| | Tongue-and-Groove, Channellock 460 |
| | Tongue-and-Groove, Diamond HL112 |
| | Tongue-and-Groove, Diamond HL18 |
| | Tongue-and-Groove, Diamond HL18P |
| | Tongue-and-Groove, Diamond HL19-1/2 |
| | Tongue-and-Groove, Fuller 10 Inch 1113 |
| | Tongue-and-Groove, Fuller 10 Inch 113 |
| Pliers (Cont.) | Tongue-and-Groove, Indestro Super 3443 |
| | Tongue-and-Groove, P&C 1243 |
| | Tongue-and-Groove, Proto 242 8 Inch |
| | Tongue-and-Groove, Proto 242-G |
| | Tongue-and-Groove, Proto 243 |
| | Tongue-and-Groove, Snap-on 90 |
| | Tongue-and-Groove, Snap-on 90A |
| | Tongue-and-Groove, Snap-on 91CP |
| | Tongue-and-Groove, Stanley 84-139 10 Inch, 2 |
| | Tongue-and-Groove, Stanley 84-140 12 Inch |
| | Tongue-and-Groove, Truecraft 509, 2 |
| | Tongue-and-Groove, Truecraft K506, 2 |
| | Tongue-and-Groove, Utica 507-10 |
| | Universal, Bonney Early |
| | Universal, Danielson 7 Inch |
| | Waterpump, BAHCO 224 10 Inch |
| | Waterpump, Barcalo 7 Inch |
| | Waterpump, Boker 6507-10 |
| | Waterpump, ChromeXQuality 10 Inch, 2 |
| | Waterpump, Craftsman 10 Inch "N" |
| Pliers (Cont.) | Waterpump, Craftsman 10 Inch "P", 2 |
| | Waterpump, Craftsman 11 Inch "P", 2 |
| | Waterpump, Craftsman 5774-9 |
| | Waterpump, Craftsman 9.5 Inch WF, 2 |
| | Waterpump, Crescent P210 10 Inch |
| | Waterpump, Danielson 10 Inch |
| | Waterpump, Duro-Chrome 2100 10 Inch |
| | Waterpump, Fuller 9 Inch |
| | Waterpump, Fuller 9 Inch 197-9 |
| | Waterpump, Fuller 9 Inch 197-9 "BF" |
| | Waterpump, Fuller 9 Inch 197-9 |
| | Waterpump, Herbrand 166 10 Inch |
| | Waterpump, Herbrand 166-1/2 10 Inch |
| | Waterpump, Kraeuter 1943-10 10 Inch |
| | Waterpump, McKaig-Hatch 10 Inch |
| | Waterpump, Merit 10 Inch, 2 |
| | Waterpump, Plomb 240 10 Inch |
| | Waterpump, Proto 240 10 Inch |
| | Waterpump, Rotfuss 10 Inch |
| | Waterpump, Sears 10 Inch 30723 "BF" |
| Pliers (Cont.) | Waterpump, Sears 12 Inch 30724 "BF" |
| | Waterpump, Sears 9.5 Inch "BF" |
| | Waterpump, Sears 9.5 Inch 3072 "BF" |
| | Waterpump, Vacuum Grip No. 9 10 Inch |
| | Waterpump, Vlchek PFH309 10 Inch |
| | Waterpump, Walden 369 10 Inch |
| | Waterpump, Williams 1520 10 Inch, 2 |
| Plomb Tool | See also Wilpen |
| | Acquisition of Cragin Tool |
| | Acquisition of J.P. Danielson |
| | Acquisition of P&C |
| | Advertisements in Periodicals |
| | Catalog (1928) 12-Point Box Wrenches |
| | Catalog (1938) Heavy-Duty Box Wrenches |
| | Catalog Resources |
| | Change to Proto Brand |
| | Company History |
| | Date Codes |
| | Employee Newsletters |
| | Hot-Broached Sockets |
| | Male-Drive Sockets |
| | Name Change to Pendleton Tool Ind. |
| | Patents Issued |
| | Pebbled Background |
| | Penens Mystery |
| | Plumb Lawsuit |
| | Proto Plomb Tool Marking |
| Plomb Tool (Cont.) | Proto Trademark, 2 |
| | Trademarks Registered |
| | WF (Wright Field) Series Tools |
| | War Finish Notation |
| | Wilpen Wrenches |
| Plomb | Early Taper Punch |
| | Model 1120 Wrench |
| | Model 1122 Wrench |
| | Model 1126 Wrench |
| | Model 1127 Wrench |
| | Model 1130 Wrench |
| | Model 1131 Wrench |
| | Model 1134 Wrench |
| | Model 1135 Wrench |
| | Model 1136 Wrench |
| | Model 1139 Wrench |
| | Model 1140 Wrench |
| | Model 1141 Wrench |
| | Model 1145 Wrench |
| | Model 1147 Wrench |
| | Model 1151 Wrench |
| | Model 1161 Wrench |
| | Model 1162 Wrench |
| | Model 1163 Wrench |
| | Model 1210 Wrench |
| Plomb (Cont.) | Model 1212 Wrench |
| | Model 1214 Wrench, 2 |
| | Model 1216 Wrench |
| | Model 1218 Wrench, 2, 3 |
| | Model 1220 Wrench, 2 |
| | Model 1222 Wrench |
| | Model 1224 Wrench |
| | Model 1226 Wrench |
| | Model 1232 Wrench |
| | Model 1234 Wrench |
| | Model 1246 Wrench |
| | Model 1516 Wrench |
| | Model 1725 Wrench |
| | Model 1730 Wrench |
| | Model 2010 Wrench |
| | Model 2034 Valve Adjuster |
| | Model 218 Pliers |
| | Model 228 Pliers |
| | Model 2336 Scraper |
| | Model 240 Pliers |
| Plomb (Cont.) | Model 246 Pliers |
| | Model 256 Pliers |
| | Model 2620 Wrench |
| | Model 3018 Wrench |
| | Model 3020 Wrench |
| | Model 3021 Wrench |
| | Model 3025 Wrench |
| | Model 3026 Wrench |
| | Model 3027 Wrench |
| | Model 3030 Wrench |
| | Model 3034 Wrench |
| | Model 3035 Wrench |
| | Model 3036 Wrench |
| | Model 3037 Wrench |
| | Model 3040 Wrench |
| | Model 3041 Wrench |
| | Model 3050 Wrench |
| | Model 3055 Wrench |
| | Model 3211 Wrench |
| | Model 3216 Wrench |
| Plomb (Cont.) | Model 3220 Wrench |
| | Model 3226 Wrench |
| | Model 3320 Wrench |
| | Model 3322 Wrench |
| | Model 3336 Wrench |
| | Model 3425 Wrench |
| | Model 3426 Wrench |
| | Model 3430 Wrench |
| | Model 3435 Wrench |
| | Model 3440 Wrench |
| | Model 3542 Wrench |
| | Model 36 Screwdriver |
| | Model 3712 Wrench |
| | Model 3720 Wrench |
| | Model 3730 Wrench |
| | Model 3732 Wrench |
| | Model 3734 Wrench |
| | Model 3736 Wrench |
| | Model 4010 Puller Set |
| | Model 4011 Puller Yoke |
| Plomb (Cont.) | Model 4020 Puller Set |
| | Model 4021 Puller Yoke |
| | Model 4022 Pressure Screw |
| | Model 4062 Pressure Screw |
| | Model 4070 Puller Set |
| | Model 4071 Puller Yoke |
| | Model 41 Center Punch |
| | Model 4508 Stud Extractor |
| | Model 4515 Stud Extractor |
| | Model 4516 Wedge |
| | Model 4517 Wedge |
| | Model 4749 Ratchet |
| | Model 4769 Drive Handle |
| | Model 4785 Tee Handle |
| | Model 4912 Crowfoot |
| | Model 5239 Screwdriver Bit |
| | Model 5249 (V239.17-1) Ratchet |
| | Model 5249 Ratchet, 2 |
| | Model 5263 Extension |
| | Model 5265 Flex Handle |
| Plomb (Cont.) | Model 5279 Socket |
| | Model 5285 Tee Handle |
| | Model 5344 Socket |
| | Model 5348 Socket |
| | Model 5348S Socket |
| | Model 5353 Socket |
| | Model 5402 Torque Wrench |
| | Model 5428 Socket, 2 |
| | Model 5428-S Socket |
| | Model 5430 Socket |
| | Model 5440-L Socket |
| | Model 5449 Ratchet |
| | Model 5463 Extension |
| | Model 5466 Flex Handle |
| | Model 5467 Flex Handle |
| | Model 5468 Flex Handle |
| | Model 5469 Speeder |
| | Model 5480 Speeder |
| | Model 5485 Tee Handle |
| | Model 5486 Ell Handle |
| Plomb (Cont.) | Model 5534 Socket |
| | Model 5542 Socket |
| | Model 5548 Socket |
| | Model 5556 Socket |
| | Model 5558 Socket |
| | Model 5572 Socket |
| | Model 5661 Extension |
| | Model 5668 Flex Handle |
| | Model 5685 Tee Handle |
| | Model 5752 Socket |
| | Model 5754-S Socket |
| | Model 5764 Socket |
| | Model 5764-N Socket |
| | Model 5776 Socket |
| | Model 5780 Socket |
| | Model 5788 Socket |
| | Model 5849 Ratchet |
| | Model 5860 Extension |
| | Model 5861-S Extension |
| | Model 5863-S Extension |
| Plomb (Cont.) | Model 6505 Wrist Pin Tool |
| | Model 6522 Socket |
| | Model 6527 Wrench |
| | Model 6601 Wrench |
| | Model 6734 Valve Adjuster |
| | Model 706 Adjustable Wrench, 2, 3 |
| | Model 706S Adjustable Wrench |
| | Model 708 Adjustable Wrench, 2, 3 |
| | Model 708S Adjustable Wrench |
| | Model 710 Adjustable Wrench, 2 |
| | Model 710S Adjustable Wrench |
| | Model 712 Adjustable Wrench, 2 |
| | Model 7258 Wrench |
| | Model 8160 Wrench |
| | Model 8161 Wrench |
| | Model 8162 Wrench |
| | Model 8180 Wrench |
| | Model 8181 Wrench |
| | Model 8182 Wrench |
| | Model 8183 Wrench, 2 |
| Plomb (Cont.) | Model 8184 Wrench |
| | Model 8185 Wrench |
| | Model 9706 Screwdriver |
| | Model AD1112 Wrench |
| | Model AD78 Wrench |
| | Model AD910 Wrench |
| | Model B5 Screwdriver |
| | Model DD15-1/2 Socket |
| | Model DD16 Socket, 2, 3 |
| | Model DDX25 Socket |
| | Model DR8 Ratchet |
| | Model DTH Flex Handle |
| | Model F21901 Crowfoot |
| | Model K21520 Crowfoot |
| | Model K21521 Crowfoot |
| | Model K21522 Crowfoot |
| | Model K21528 Crowfoot |
| | Model K21529 Crowfoot |
| | Model K21901 Crowfoot |
| | Model K21902 Crowfoot |
| Plomb (Cont.) | Model K21904 Crowfoot |
| | Model K21906 Crowfoot |
| | Model K21920 Crowfoot |
| | Model K21923 Crowfoot |
| | Model KI Wrench |
| | Model O910 Wrench, 2 |
| | Model S178 Wrench |
| | Model U1112 Wrench |
| | Model U910 Wrench |
| | Model US 301S Socket |
| | Model V1314 Wrench |
| | Model V89 Wrench |
| | Model V910 Wrench |
| | Model WF-100 Wrench |
| | Model WF-102 Wrench |
| | Model WF-103 Wrench |
| | Model WF-115 Wrench |
| | Model WF-123 Socket |
| | Model WF-125 Socket |
| | Model WF-137 Socket |
| Plomb (Cont.) | Model WF-20 Flex Handle |
| | Model WF-22 Tee Handle |
| | Model WF-34 Extension |
| | Model WF-37 Flex Handle |
| | Model WF-38 Ratchet |
| | Model WF-50 Socket |
| | Model WF-55 Socket |
| | Model WF-56 Socket |
| | Model WF-62 Socket |
| | Model WF-7 Flex Handle |
| | Model WF-79 Wrench |
| | Model WF-8 Ratchet |
| | Model WF-80 Wrench |
| | Model WF-81 Wrench |
| | Model WF-82 Wrench |
| | Model WF-83 Wrench |
| | Model WF-84 Wrench |
| | Model WF-85 Wrench |
| | Model WF-8S Ratchet |
| | Model WF-94 Wrench |
| Plomb (Cont.) | Model WF-98 Wrench |
| | Model WF-99 Wrench |
| | Model Wright-83820 Socket |
| | Mystery Flex Handle |
| | Ranger AT158 Wrench |
| | Socket Wrench, 9/16 Speeder Early |
| | Socket, 9/16-Male Drive 1 Inch |
| | Socket, 9/16-Male Drive 13/16 |
| | Sockets, 9/16-Male Hex Drive |
| Plumb [logo] | Trademark for Plumb, Fayette R. Inc. |
| Plumb, Fayette R. Inc. | Plumb Trademark |
| | Plumb [logo] Trademark |
| Plumb | Trademark for Plumb, Fayette R. Inc. |
| Plumbers' Trade Journal | 1915 Ad for Walworth Parmelee Wrench |
| | 1915 Notice for Parmelee Tool Company |
| | 1921 Ad for J.P. Danielson |
| Pocket-Pack | Trademark for Barcalo Mfg. |
| Pollard, L.L. | Patent 166,553 |
| Polly | Brand Used by Gellman Mfg. |
| Polygon | Brand Used by Indestro Mfg. |
| Pool, J.L. | Patent 3,681,840, 2 |
| Poole, C.E. et al | Patent 2,368,069 |
| Popular Mechanics | 1906 Ad for Utica Pliers |
| | 1907 Ad for Currier-Koeth Mfg. |
| | 1916 Ad for Crescent Universal Pliers |
| | 1924 Ad for Speednut Wrench Corporation |
| | 1924 Ad for Vlchek Tool Kits |
| | 1925 Ad for Cornwell |
| | 1925 Ad for Husky Wrench |
| | 1947 Ad for Husky Socket Set |
| | 1948 Ad for Wood Specialty Mfg. |
| | 1950 Ad for McKaig-Hatch |
| | 1953 Ad for B & W Wholesale Supply |
| | 1954 Ad for Hunter Tools |
| | 1955 Ad for Stevens-Walden |
| Popular Science | 1924 Ad for Bonney C.V. Wrenches, 2 |
| | 1924 Ad for Hoe Corporation |
| | 1924 Ad for Kraeuter Pliers |
| | 1926 Ad for Kraeuter Pliers |
| | 1928 Ad for Plomb Screwdriver |
| | 1929 Ad for Hinsdale C-V Wrenches |
| | 1929 Ad for Plomb Socket Set |
| | 1929 Ad for Williams "Volume" |
| | 1930 Ad for Bob Cat Socket Set |
| | 1931 Ad for Bob Cat Chisel Set |
| | 1950 Notice for Kipton Palm-Grip |
| | 1952 Ad for Speed-Hed Wrenches, 2 |
| | 1953 Ad for Palmer Welloct Pliers |
| | 1957 Ad for Petersen Mfg. Co. |
| Port Clinton Mfg. | See also Hydra-Hex |
| | Company Profile |
| | Patents Issued |
| Porter, H.K. Inc. | Company History |
| | Patents Issued |
| | Trademarks Registered |
| Porter, H.K. | Patent 226,190 |
| | Patent 236,695 |
| | Patent 245,314 |
| | Patent 584,191 |
| | Patent 909,663 |
| Porter, L.S. | Patent 3,997,279 |
| Power-Cut | Trademark for Bergman Tool Mfg. |
| Power-Track | Trademark for Pendleton Tool Ind. |
| Powr-Kraft | See also Montgomery Ward & Co. |
| | Combination Wrench, 3/4, 2 |
| | Production by Duro, 2 |
| | Sockets, 1/2-Drive, 2 |
| | Trademark for Montgomery Ward & Co. |
| Pratt, L.E. | Patent 2,304,766 |
| | Patent 2,469,572 |
| Pratt-Whitney Aircraft | Model 1056 Wrench |
| | Model 1057 Pliers |
| | Model PWA1113 Wrench |
| | Model PWA1397 Flex Handle |
| | Model PWA1398 Socket |
| | Model PWA1401 Wrench |
| | Production by Bonney, 2 |
| | Production by Crescent |
| | Production by Crescent Tool |
| | Production by Snap-on |
| Predmore, E. | Patent 2,266,511 |
| Pressure Screw | 9 Inch, Blue Point CG-270-1 |
| | Plomb 4022 |
| | Plomb 4062 |
| Prettyman, J.H. | Patent 1,859,600 |
| Price War! | the Great Box Wrench |
| Priest, D.E. | Patent 2,058,107 |
| | Patent 2,292,657 |
| | Patent RE20,252 |
| Priest, E.D. | Patent 3,742,788 |
| Pro-Forge | Trademark for Hi-Test Premier Products |
| Proto | Acquisition by Stanley (1984) |
| | Acquisition by Stanley Works (1984) |
| | Catalog Resources |
| | Clik-Stop Trademark |
| | Combination Pliers, 6 Inch |
| | Model 1126 Wrench |
| | Model 1130L Wrench |
| | Model 1212 Wrench |
| | Model 1214 Wrench |
| | Model 1216 Wrench |
| | Model 1220 Wrench, 2 |
| | Model 1224 Wrench, 2 |
| | Model 1226 Wrench |
| | Model 1232 Wrench |
| | Model 1246 Wrench |
| | Model 202 Pliers |
| | Model 234 Pliers |
| | Model 240 Pliers |
| | Model 242-G Pliers |
| | Model 243 Pliers |
| Proto (Cont.) | Model 260 Pliers |
| | Model 3018 Wrench |
| | Model 3030 Wrench |
| | Model 3040 Wrench |
| | Model 3336 Wrench |
| | Model 3348 Wrench |
| | Model 3352 Wrench |
| | Model 3364 Wrench |
| | Model 3712 Wrench |
| | Model 371214 Wrench |
| | Model 3718 Wrench |
| | Model 3720 Wrench |
| | Model 500M Ratcheting Crowfoot |
| | Model 5249 Ratchet |
| | Model 5424 Socket |
| | Model 5449 Ratchet |
| | Model 6735 Valve Adjuster |
| | Model 704-S Adjustable Wrench |
| | Model 708-S Adjustable Wrench |
| | Model 712-S Adjustable Wrench |
| Proto (Cont.) | Model 720-SL Adjustable Wrench |
| | Model 8071785 Socket |
| | Model 810 Wrench |
| | Model WF-38 Ratchet |
| | Proto Tools Division of IR, 2 |
| | Socket Set, 1/4-Drive 500 |
| | Tongue-and-Groove Pliers, 8 Inch |
| | Trademark for Plomb Tool, 2 |
| Pry Bar | Craftsman 4283 "WF", 2 |
| Pugh, W.E. et al | Patent 2,496,308 |
| Pugh, W.E. | Patent 2,496,309 |
| Puller Jaw | 7 Inch, Blue Point CG-270-3 |
| Puller Part | Jaw, Blue Point CG-270-3 7 Inch |
| | Pressure Plate, Snap-on CG-270-5 |
| Puller Yoke | Plomb 4011 |
| | Plomb 4021 |
| | Plomb 4071 |
| Puller | Battery Terminal, Blue Bird 21 |
| | Bearing, Snap-on CJ-127A |
| | Slide Hammer, K-D No. 2079 |
| | Three-Jaw, Blue Point CG-273 |
| | Three-Jaw, Herbrand 840 |
| | Three-Jaw, Plomb 4070 |
| | Three-Jaw, Snap-on CG-273 |
| | Two-Jaw, Blue Point CG-270, 2 |
| | Two-Jaw, Herbrand 832 |
| | Two-Jaw, OTC 1000 |
| | Two-Jaw, OTC 1001 |
| | Two-Jaw, OTC 1002 |
| | Two-Jaw, Plomb 4010 |
| | Two-Jaw, Plomb 4020 |
| | Two-Jaw, Snap-on CG-270 |
| | Two-Jaw, Truth |
| Pullman, H.S. | Patent 295,885, 2 |
| | Patent 351,339 |
| Punch | Center, Dunlap |
| | Center, Dunlap 3/8 |
| | Center, Plomb 41 |
| | Pin, Blue Point No. 610 |
| | Pin, Craftsman 3/16 |
| | Pin, Mayhew 1/4 |
| | Pin, Truth 7/64 |
| | Pin, Vlchek X872 |
| | Specialty, Indestro 2021-V8 |
| | Taper, Plomb Early |
| | Tapered, Craftsman 5/32 |
| | Tapered, Crescent 489 |
| | Tapered, Forged Steel Products 208 |
| | Tapered, Millers Falls 803 |
| | Tapered, Vlchek 1/4 |
| | Tapered, Vlchek 1/8 |
| Push-Puller | Trademark for Owatonna Tool Co. |
| Putrow, E.P. | Patent 1,544,520, 2, 3 |